). As a result, there are numerous publications in this area and to add, most of them are unique in their own way, in a sense that, each article provides a different insight into the modeling criteria and the assumptions used to treat the process.Modeling in convective-in-tube systems: http://www.tibtd.org.tr/2009-1/107-116.pdf
MP Boiling applications find extensive use in microscale heat transfer flows and eventually help in designing systems to relieve vapor clot, removing bubbly flow altogether or enhancing it, modulating the curvature of the flow for better heat transfer characteristics etc..(Heat Transfer in Boiling Metals by Natural Convection
, Boiling Heat Transfer: Modern Developments and Advances
)The article http://www.d43d.com/D43D_09_presentations/Thome_Tutorial.pdf?PHPSESSID=5adc3d3f7d7c3d481c15730a0a9a7dcd
presents a good review of the fundamentals of microscale flow heat transfer.
Also, note, a experimental study for one's numerical validation: Experimental work on saturated flow boiling in micro channels
ftp://131.204.110.10/pub/hejingl/Course/Boiling%20and%20Condensation/Research%20paper/EXPERIMENTAL%20STUDY%20ON%20SATURATED%20FLOW%20BOILING%20CRITICAL%20HEAT%20FLUX%20in%20MC.pdf
I found the work by Dr. Mudawar on flow boiling heat transfer in microchannels : development of two-phase flow model quite interesting..Take a look here
http://www.me.hawaii.edu/Qu_res/paper%20pdf/P-J-07.pdf
PhD work by Dr. Geisler in the area of buoyancy driven 2phase flow and boiling heat transfer in channels,
http://www.me.umn.edu/~kgeisler/Geisler_PhD_abstract_contents.pdf
gives a nice review of the modeling and experiments.
Also, find a good review of flow instabilities arising in boiling 2phase flow in natural circulation systems
downloads.hindawi.com/journals/stni/2008/573192.pdf
Find Several Journal papers of Dr. Kandlikar's group doing heat transfer studies (multiphase experiments)
http://www.rit.edu/kgcoe/mechanical/taleme/Papers/
Find multiple journal articles available for download from the Multiphase lab from Israel inst of tech.
http://multiphaselab.technion.ac.il/2000.htm
I am quite thrilled by the use of mp models for boiling purposes. For ex. treatment of wall heat flux using RPI boiling model, to convert Q to Twall is a nice procedure. These are modeling innovations one must definitely appreciate.
For a quick review on boiling heat transfer models / applications: I, on most occasions, look to the WLV handbook. It has been quite useful in providing you with quick information that one would otherwise have to obtain using advanced text books.
http://www.wlv.com/products/databook/db3/data/db3ch9.pdf
(Chapter on boiling heat transfer on external surfaces)
Another favorite handbook of mine is
http://www.unene.ca/un702-2005/lectures/C-HeatTransferandFluidFlow.pdf
- has nice descriptions of boiling heat transfer with quick graphs, plots, brief theories, heat transfer correlations and schematics for easy understanding..
Other applications of boiling heat transfer:
http://serve.me.nus.edu.sg/mpelps/Publications/Lee_Garimella_IJHMT_2007.pdf
(boiling heat transfer in silicon microchannel arrays)
CFD modeling of subcooled flow boiling in nuclear sector (CFX software) - the article contains description of the forces, numerical treatment of the heat transfer problem etc..
http://www.djs.si/proc/bled2005/htm/pdf/0140.pdf
http://www.nea.fr/html/nsd/reports/2007/nea6298/Technical_Session_A7_Boiling_Models/37-Koncar.pdf
(contains forced convective boiling in channels)
Subcooled boiling near wall http://www.osti.gov/bridge/servlets/purl/821308-lStCwl/native/821308.pdf
Modeling liquid velocity near wall during boiling flow ftp://ftp1.cadhome.cn/CAE/HEAT/ASME2005/HT2005-72182.pdf
If you have any specific paper/work that you would like me to add here, kindly let me know.
No comments:
Post a Comment